Make your own free website on Tripod.com

tipstricks.htm

12/01/04

 

 

 

 When running an eblade autococker there are a few things that you should keep in mind..  First of all, if you are shooting the eblade on an Eclipse or Smart Parts Cocker, the proper input pressure you should be running is 300 psi.  Running lower or higher pressures will drastically affect your efficiency and may result in drop off.

  If you have an Eye installed on your marker then set your marker to factory fast and use the eye.  Factory fast with the eye will yield phenomenal results when the eye sensitivity is adjusted properly.  More on tweaking the eblade soon...

This site was last updated 05/25/04